Quick PVC Fencing Price Guide
As a guide, the cost of PVC fencing in Brisbane runs from about A$65 to A$290 per metre depending on style and height, with picket fencing generally in the A$105 to A$235 per metre band. Where a project lands in that range comes down to the fence you choose, the site it goes on, and whether the price you are quoted covers the fencing only or the fencing installed.
Use these as guide figures
Per-metre ranges are a starting point for budgeting, not a fixed rate. A fence is priced off its measured run, height, style and gates, so the only number that means anything for your property is an itemised quote. Ask for one before you commit to a budget.
Installed
The quote needs to identify both the supplied fencing and the installation work. Check the measured run, fence height and style, gates, delivery, site preparation and exclusions before comparing the per-metre figure.
Supply-Only or DIY
A panel-kit figure is not an installed figure. Confirm the exact kit, panel dimensions, quantity and included parts, then account separately for anything outside that supply quote.
Installed PVC Fencing Cost in Brisbane
An installed price should describe a finished job, not just a metre rate. That is why the A$65 to A$290 guide range is wide: fence style and height, how easy the boundary is to work along, the number of gates, decorative features, delivery and any site preparation all move the total. A quote that does not name those things cannot be compared with one that does.
As a rough order of magnitude, a standard residential privacy fence has previously come in around A$4,000. Treat that as a sense of scale rather than a price. Without the length, height and inclusions behind it, no single figure transfers from one property to another.
If you are weighing up labour against doing the work yourself, read the step-by-step PVC fence installation guide. It sets out the work involved so you can decide which parts belong in an installed quote and which parts you are prepared to handle.
Supply-Only and DIY PVC Fencing Cost
If you are installing the fence yourself, you are buying panels rather than a finished job. Our range covers nine panel kits: four privacy, partial-privacy and semi-privacy designs at 1800 mm high × 2388 mm wide, and five picket designs at 1200 mm high × 2388 mm wide. Pickets slot into pre-routed rails, so assembly is straightforward for a competent DIYer.
The thing to watch is what a kit price does and does not include. On the Moreton full-privacy kit, for example, posts are listed separately so runs can be set out to suit the boundary. Ask for the kit name, panel dimensions, quantity and a full parts list, so you are pricing a complete fence rather than a stack of panels.
Doing it yourself takes the installation labour out of the price. Whether that is worth it depends on the run, the number of gates and how much of the work you want to take on. That is why it is worth getting both a supply-only and an installed quote for the same fence before deciding.
What PVC Costs You After Installation
The purchase price is only part of the cost of PVC fencing. Unlike timber, PVC does not need painting, staining or sealing, and it is rot and termite proof. Our panels are made from UV-stabilised virgin PVC, chosen for the Queensland sun, and maintenance in practice amounts to hosing them down occasionally. They carry a 30-year limited manufacturer warranty.
That is where PVC tends to make back a higher starting price. A timber fence needs re-treating every few years to stay presentable, and each of those rounds costs money and a weekend. Over the same period a PVC fence costs close to nothing to keep, which is worth weighing against the per-metre figure when you compare the two.
What Changes the Total PVC Fence Price?
Style and Height
Picket, privacy and semi-privacy designs use different panel formats. Record the exact style and height on every quote.
Site and Preparation
Ask the quote to state how ground conditions, access and site preparation are handled rather than leaving them as assumptions.
Gates and Extras
List gates and decorative features separately so their cost is not hidden inside an unmatched metre rate.
How to Compare PVC Fencing Quotes
Put each quote against the same short checklist:
- the measured fence run, height and named panel style;
- whether the price is supply-only, installation-only, or supply and installation;
- the number and type of gates or decorative features;
- delivery, site preparation and any work specifically excluded; and
- the date and validity period of the quote.
Frequently Asked Questions
How much does PVC fencing cost per metre in Brisbane?
As a guide, from about A$65 to A$290 per metre depending on style and height, with picket fencing generally between A$105 and A$235 per metre. These are budgeting ranges. The cost of PVC fencing for a specific property depends on the measured run, the style, the number of gates and the site, so get an itemised quote before setting a budget.
Is supply-only PVC fencing cheaper than installed fencing?
Supply-only takes the installation labour out of the price, so the quoted figure is lower. Whether it works out cheaper overall depends on the run, the gates and how much of the work you take on. Get both quotes for the same fence and compare them side by side.
What DIY PVC panel-kit sizes are available?
The current catalogue lists four privacy or semi-privacy kits at 1800 mm high × 2388 mm wide and five picket kits at 1200 mm high × 2388 mm wide.
What should an installed PVC fencing quote include?
Ask for the measured run, fence height and style, gates, delivery, site preparation, installation scope, exclusions, quote date and validity period.
Is PVC fencing cheaper than timber?
Usually not to buy, but often over time. PVC needs no painting, staining or sealing and will not rot, so the ongoing cost is close to nothing beyond an occasional wash. Timber is typically cheaper up front and needs re-treating every few years.